ITNE3007 Advanced Routing | My Assignment Tutor

ITNE3007Advanced RoutingProject ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 2 Assignment TypeGroup Project (2 students in each group)Week Issued7Total Marks20Submission DeadlineWeek 12 (23-May-2021) via MoodleSubmission filesOnly one submission per group(group member name and ID should beincluded in the report)GNS3 file, Word documentPenaltiesPenalties for late submission and plagiarismin accordance with VIT guidelinesThe purpose of the assessment is to test students on theirability to apply Routing theories and concepts. ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 3Objective(s)This assessment relates to the unit learning outcomes as specified in the unit descriptor. Thisassessment is designed to evaluate student’s ability on planning, configuring and verifying theimplementation of secure enterprise LAN and WAN network solutions using multiple routingprotocols.The following ULOs are assessed in this assessment. LO1Explain basic routing concepts and plan the configuration and verification of routingprotocols and their optimization in enterprise networksLO2Analyse the technologies, components, and metrics used to implement and verifyrouting in diverse, large-scale internetworks based on enterprise requirements.LO3Critically evaluate various multi-area routing functions and benefits for routingefficiencies in network operations in order to implement and verify routing in acomplex enterprise network.LO4Implement and verify a redistribution solution in a multi-protocol network withcontrol path selection and loop-free topology according to a given network designmeeting enterprise requirements.LO5Evaluate common network security and performance issues and identify the toolsneeded to control the path INSTRUCTIONSThese instructions apply to the Project:Group Project (Weightage 20%) – The submissions should be uploaded on the LMS by Session 12This Project will focus on student’s ability to implement an enterprise level network that runs multiplerouting protocols. The project should be conducted as a group task by a group of 2 students. Upon theimplementation of the network, students should produce a comprehensive report, which includesscreenshots of configuration of routers and other nodes, and brief explanation of the screenshots.Students should implement the network based on the given scenario in a virtual environment usingGNS3. Please make sure to name the devices with the group name.If any third-party content is used, the citation of sources is mandatory and should follow IEEE style.Remember that all your screenshots should include your student ID as the hostname of router (e.g.Melbourne3-S1234).ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 4Scenario:ABC Pty is an Airline company which owns the public IP range 17.86.98.0/24 and AS number 31400.They had recently acquired a start-up software development company named XYZ Pty Ltd. The ABCPty Ltd and XYZ Pty Ltd have been respectively running OSPF and EIGRP as their Interior GatewayProtocols. In order to establish connectivity between two sites, the management decided to use routeredistribution.ABC Pty Ltd is connected to the internet through ISP1 with AS number 42000 using a BGP peering.A simplified network topology is given below with the IP Allocations for each network.Figure 1: Topology Diagram ISP RouterS 0/0S 0/0ABC Pty LtdFa0/1Fa0/0Fa0/0R1 S 0/1 XYZ Pty LtdS 0/1R4Fa0/1Fa0/0Fa0/0R2Fa1/0Fa1/0 Fa1/0Fa0/0 R3 R5Fa0/1 Fa0/1ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 5Table 1: IP Address Plan Device NameInterfaceIP AddressISP RouterS0/010.0.1.253/30Lo15.62.20.1/23R1S0/010.0.1.254/30S0/1172.17.3.1/30Fa0/0172.16.3.1/30Lo01.1.1.1/32Lo117.86.98.1/24R2Fa0/0172.16.3.2/30Fa0/1172.16.0.1/24Fa1/0172.16.3.5/30Lo02.2.2.2/32R3Fa0/0172.16.1.1/24Fa0/1172.16.2.1/24Fa1/0172.16.3.6/30R4S0/1172.17.3.2/30Fa0/0172.17.0.1/24Fa0/1172.17.3.5/30R5Fa0/0172.17.1.1/24Fa0/1172.17.2.1/24Fa1/0172.17.3.6/30 ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 6You are required to implement the given topology in GNS3 and configure the following tasks toproduce this topology as a proof of concept to the management of ABC Pty Ltd.Task 1: Configuring Interior Gateway Protocols i.Configure OSPF with passive interfaces in ABC Pty Ltd network (exclude Loopback interfacesfrom being advertised in OSPF process)Configure EIGRP with passive interfaces in XYZ Pty Ltd networkii. Task 2: Re-distribute routes into Interior Gateway Protocolsi. Re-distribute routes in ABC Pty Ltd network into EIGRP routing process running in Router 1ii. Re-distribute routes in XYZ Pty Ltd network into OSPF routing process running in Router 1Task 3: Configure BGP in the networki. Configure eBGP Peering between Router 1 and ISP routerii. Configure iBGP Peering between Router 1 and Router 2Task 4: Securing routing table with Filtering Ingress Routesi. Configure Ingress Filtering on ISP routerWhat to Submit:You need to submit a report which includes the screenshots of your configurations and verificationswith descriptions for each screenshot along with the GNS3 file of your project on Moodle.Please Note: All work should be submitted by the due date and time. Late submissions will bepenalized at the rate of 10% per day including weekends.ITNE3007 Advanced RoutingCopyright © 2015-2020 VIT, All Rights Reserved. 7Marking Guide: 100 MarksPlease note that this project will contribute towards 20% of the final grade. TaskDescriptionMarksReport LayoutThe report style, language and structure should beappropriate. All screenshots and descriptions need to becompiled and in a single final report and any given suggestionsneed to be incorporated.The report must containi. Cover page with Unit Code, Group Name, UnitName and Student IDsii. Table of ContentsScreenshots with caption/description10Network TopologyTopology must be created according to the given scenario10Network ConfigurationsThis section should include the configurations done inthe virtualized network environment. You should breakdown this section into four tasks and include at least 7screen shots from each of these tasks and a briefdescription.• Successful configuration of task 1• Successful configuration of task 2• Successful configuration of task 3• Successful configuration of task 440ResultsThis section should include the verification of yourconfigurations. Results should prove that the network has beenconfigured properly and according to the scenario• Verification of task1 configurations• Verification of task2 configurations• Verification of task3 configurations• Verification of task4 configurations40

QUALITY: 100% ORIGINAL PAPER – NO PLAGIARISM – CUSTOM PAPER

Leave a Reply

Your email address will not be published. Required fields are marked *